No products found.

Use fewer filters or clear filters.

20oz UV DTF Cup Wraps: Full Wraps for Skinny Tumblers

The 20oz skinny tumbler is the classic tall, slim stainless steel cup with a slide lid and straw. It has a long straight body that is perfect for a full wrap design, and DTF Ghost's 20oz UV DTF cup wraps are sized for exactly that. Each wrap is 9.3" wide and 8.2" tall, printed with UV-cured inks, finished with a raised gloss varnish and backed with a pressure-sensitive adhesive. You apply it by hand at room temperature: no sublimation oven, no shrink wrap, no epoxy and no heat press.

The 20oz collection focuses on bold all-over patterns, mostly sports and school themes, that look great on a tall cup.

Why Choose UV DTF for Skinny Tumblers

Decorating a skinny tumbler used to mean sublimation blanks and an oven, or hours of epoxy and glitter. A UV DTF wrap changes that:

  • Any finish you can test: works on many stainless steel and coated tumblers, not just sublimation blanks
  • No curing time: apply, burnish and reveal in a few minutes
  • Raised texture: the gloss varnish gives a slightly 3D feel you can see and touch
  • Full color, fine detail: small icons, stars and lettering print sharply
  • Easy to batch: great for team orders where every parent wants the same cup

Wrap Size and Fit

  • Size: 9.3" wide x 8.2" tall
  • Made for: straight 20oz skinny tumblers
  • Coverage: the wrap covers most of the straight body, from just below the lid line to just above the base

Skinny tumbler brands vary a little in circumference and height, so measure your blank first. Leave a small gap below the rim so the wrap stays away from the drinking area. If the wrap is slightly shorter than the circumference, line up the seam with the back of the tumbler.

Designs in the 20oz Collection

Sports Tumbler Wraps

  • Baseball: an all-over baseball pattern for sports lovers, from players to grandparents in the stands
  • Softball: a softball glove and ball with smiley icons, a cheerful pick for softball moms and players
  • Volleyball: Volleyball Vibes with smiley faces, lightning bolts and stars
  • Football: a retro football pattern with rainbows and stars, made for Friday nights and tailgates
  • Basketball: Basketball Fever with retro graphics for players, coaches and fans

School and Career

  • Groovy school: stars, apples and globes in a fun pattern for teachers and school staff
  • Health career: groovy flowers and medical elements for nurses, aides and healthcare workers

Floral and Holiday

  • Vivid floral celebration: a bright, full-coverage flower design for everyday use and birthdays
  • Christmas car: a repeating pattern of little cars carrying trees and presents, a cute holiday gift

All designs are also available as a 3" x 4" decal, a 16oz wrap or a 24oz wrap from the product page.

Team Orders Made Easy

Sports wraps are the heart of this collection, and they shine in team orders. A typical order looks like this:

  1. Pick the team sport wrap: baseball, softball, volleyball, football or basketball.
  2. Order one wrap for each player, coach or parent.
  3. Apply the wraps to matching skinny tumblers in team colors.
  4. Add the player's name or number with a small vinyl or UV DTF decal from UV DTF Transfers by Size.

Teams love them as end-of-season gifts, coach thank-yous and booster club fundraisers.

Applying a 20oz Wrap

  1. Prep the tumbler. Clean the outside, then wipe with a little rubbing alcohol and let it evaporate fully. Oils and residue are the main cause of edge lifting.
  2. Remove the backing. Hold the wrap by its edges so fingertips do not touch the adhesive.
  3. Start at the seam. Line up one short edge vertically on the back of the tumbler. A strip of painter's tape can hold it straight.
  4. Roll and smooth. Roll the tumbler slowly across the wrap, smoothing with your hand as you go to push air out.
  5. Burnish. With the clear carrier still on, make two to four firm passes with a squeegee or card from the center outward, giving extra attention to thin lines and small stars.
  6. Reveal. Peel the carrier back slowly at a low angle. If any piece lifts, lay the carrier back down and burnish again.

Step-by-step photos and a troubleshooting table are in the UV DTF Application Guide.

Will It Work on My Tumbler?

Bare stainless steel and smooth coated tumblers are good candidates. Powder-coated, textured, matte or rubberized finishes vary a lot, so apply a test decal on the same tumbler model first and check it after a few days of normal use. Flexible silicone sleeves and soft plastic are not suitable.

Care for Wrapped Tumblers

Let the adhesive settle before heavy use. Hand-wash with lukewarm water, mild soap and a soft cloth, rinse without soaking and pat dry. Avoid scrubbing pads, bleach and acetone, and skip the dishwasher; a decal does not make the tumbler dishwasher safe. Keep the wrap below the lid line. See the UV DTF Transfer Care Guide for more.

Who Orders 20oz Wraps

  • Team parents and booster clubs ordering matching cups
  • Coaches looking for end-of-season gifts
  • Tumbler shops that sell skinny tumblers at markets and online
  • Nurses and school staff who want a fun everyday cup
  • Crafters who prefer a no-oven, no-epoxy way to decorate

Gift Ideas Beyond the Team

Skinny tumblers make thoughtful gifts all year. The health career floral wrap is a favorite for nurses week, graduations and hospital staff thank-yous. The groovy school pattern suits first-day and end-of-year teacher gifts, especially with a coffee gift card tucked inside. The vivid floral design works for birthdays, Mother's Day and bridesmaid boxes, and the Christmas car pattern turns a plain tumbler into a ready holiday gift for coworkers and neighbors.

Tips for a Clean Wrap on a Skinny Tumbler

  • Measure the straight section of the tumbler; the 9.3" x 8.2" wrap is made for standard 20oz skinny tumblers.
  • Start the wrap at the back seam so any small overlap sits away from the front.
  • Roll the tumbler slowly while pressing from the center outward to push out air.
  • Burnish with two to four firm passes before peeling the carrier at a low angle.

20oz UV DTF Cup Wraps FAQ

What size is the 20oz wrap?

9.3" wide by 8.2" tall, designed for straight 20oz skinny tumblers.

Do I need a sublimation tumbler?

No. UV DTF sticks with adhesive, so it works on many non-sublimation stainless steel tumblers. Test unusual coatings first.

Can I use this wrap on a 20oz tumbler with a handle?

Handles interrupt a full wrap. Choose a decal or cut the design carefully around the handle area.

Can I add a name to the wrap?

Not to the wrap itself, but you can add a separate name or number decal on top of an open area or the back of the tumbler.

Is it dishwasher safe?

Hand-wash for the best life. A decal does not make the tumbler dishwasher safe.

Can I get these designs for other cup sizes?

Yes. Each design comes as a decal, 16oz, 20oz skinny or 24oz wrap on its product page.

Shop 20oz UV DTF Cup Wraps

Sports, school, nurse, floral and holiday wraps for skinny tumblers, applied in minutes without heat. Browse all UV designs in Print Ready UV DTF, or see 16oz UV DTF Cup Wraps and 24oz UV DTF Cup Wraps.