Membership Discounts Are Applied Automatically at Checkout
Unlock 30% of Pricing Production
BLACK FRIDAY AT DTF GHOST
Use Code: BLACKGHOST30
Use Code: BLACKGHOST30
✦ PRINT MORE. CREATE MORE.
Use Code: BLACKGHOST30
Use Code: BLACKGHOST30
Measure the target surfaces before laying out the individual logos, labels and names for your sheet.
Select the length for the 22-inch-wide layout and open the UV DTF Gang Sheet Builder.
Add the names, labels and artwork you want on the same sheet.
Size each decal for the intended item. Leave a cutting gap between designs and check fine lettering at actual size.
Check orientation, transparency and counts before saving. Confirm the selected size and sheet quantity at checkout.
DTF Ghost combines print quality, clear ordering, and access to real help when a job needs it.
Size and repeat each label or logo. DTF Ghost prints vivid UV-cured color and raised gloss so decals keep their own dimensions on a shared sheet.
DTF Ghost prints the decal layout in full color with UV-cured inks and a glossy varnish. The raised finish makes logos and lettering stand out on suitable hard goods.
Trim the decals apart, then apply them to clean, smooth surfaces such as compatible glass and acrylic. The transfer is ready to apply without a heat press or UV lamp.
Ask our team about artwork, compatible surfaces, or application before ordering. If a shipment arrives damaged or incorrect, use the DTF Ghost Help Center to report the issue with your order details.
Plan decal sizes around the actual surfaces you are decorating.
Size each logo using the smooth usable area on the actual item. Check seams and tight curves with a paper mockup, then set the finished width and height in the UV DTF Builder.
Use high-resolution artwork at its final size. For raster files, 300 DPI is a practical target for sharp lettering. Inspect thin strokes, isolated details and unintended background pixels in the preview.
Keep a cutting gap around artwork, including names and small labels added late in the layout. Review count, orientation and cropping on the 22-inch-wide canvas before saving.
Separate the decals before applying them. Test one on the same type of blank before decorating the rest of the batch.
Remove dust, oil and residue. Let the item dry completely and test the actual finish.
Cut around each decal before removing the backing. Check placement, then set one edge down and smooth across the surface.
Use a squeegee or smooth card to apply firm, even pressure through the carrier from the center outward. Check fine lettering and edges.
Pull the clear carrier back slowly. If a detail lifts, return the carrier over that spot and burnish again.
Follow the bonding time on your instruction card before washing. Use mild soap and a soft cloth, and avoid soaking, abrasives and dishwasher cycles. Place decals on the exterior of drinkware away from the rim.
Choose by the artwork you have ready, the finished decal size and the number of designs you need.
Easy exact-size ordering for one peel-and-stick decal. Size one design to the usable area on a tumbler, bottle or acrylic display.
View optionMix decal artwork and quantities online. Place repeat logos, different names and size variations on one 22-inch sheet.
Current optionSend a finished decal layout directly to production. Keep the sizes and spacing from your own design software and reuse the file for restocks.
View optionArtwork layout, raised UV DTF decals and application to hard goods.
Combine logos, names, labels and graphics in different sizes. For a tumbler batch, repeat the shared logo and add one copy of each individual name. Leave enough space to cut the decals apart.
Start with sharp artwork and a clear background. Check the smallest lettering at actual size, avoid fragile hairlines, and leave space to cut around each decal.
The Builder canvas is 22 inches wide. Capacity depends on finished decal sizes, spacing and selected length. Place the larger decals first and fill remaining gaps with smaller logos or names.
Yes. Review the small labels at actual size before submitting. Give thin strokes and isolated dots enough weight to transfer cleanly and test a small decal on the intended surface.
Test a spare decal on the same surface finish first. Check that the film releases cleanly and that fine details stay in place before decorating the remaining items.
The ink is cured during production. Use a smooth card or squeegee to apply the finished transfer at room temperature.
Lay the carrier back over that area, burnish firmly, then peel again slowly at a low angle. Try this on a sample before applying a full run.
Hand-wash with mild soap and a soft cloth after the bonding interval on the instruction card. Avoid soaking, abrasives and dishwasher cycles.
Yes. Use UV DTF Upload for one print-ready sheet. Use UV DTF By Size for individual decals.
Yes. Set each decal size to suit the actual item. If a paper mockup wrinkles when you wrap it around a taper, use a smaller graphic or split the design before placing it on the sheet.
Upload each design at sufficient resolution for its finished dimensions. Transparent PNG is a good choice for raster graphics with clear areas. Keep space between decals so you can cut them apart easily.
Apply the decal by hand to clean, dry glass, acrylic, or other suitable smooth hard surfaces. Test specialty coatings first. Hand-wash decorated drinkware and avoid soaking or scrubbing the print. See our UV DTF application guide.
Production and transit are separate. UPS Express transit is generally 1–3 business days after dispatch. Check the estimate for your address and the shipping policy.
Contact us as soon as you spot the issue and include your order number. We can review changes before printing starts. Once production begins, the order cannot normally be canceled. See the Help Center.
Report the issue within seven days of delivery. Send your order number, a brief description, and photos of the prints and packaging. See the refund policy for the exceptions to returns on custom prints and how replacements or store credit are handled.
Measure the flat or gently curved area on your item before you set decal dimensions. Test one before decorating a full batch.
Get help with application